Maintenance, Unit repair and excluded liability – Siemens sitrans LU01 User Manual
Page 104
Page 98
SITRANS LU01 – INSTRUCTION MANUAL
7ML19985BE02
mmmm
m
Main
te
nance
Maintenance
The SITRANS LU01 should require no maintenance or cleaning, though good
housekeeping practices in and around the area of the enclosure are recommended.
Wipe out the area of the enclosure lid docking bay recess with a clean dry cloth (if
necessary) before installing the programmer.
Transducer inspection, to verify the effectiveness of the self cleaning design, is
recommended. If material build up on the transducer face is observed, to maintain
maximum system performance, a schedule of regular cleaning should be adopted.
Unit Repair and Excluded Liability
All changes and repairs must be done by qualified personnel and applicable safety
regulations must be followed. Please note the following:
•
The user is responsible for all changes and repairs made to the device.
•
All new components must be provided by Siemens Milltronics Process
Instruments Inc.
•
Restrict repair to faulty components only
•
Do not re-use faulty components.