Siemens sitrans LU01 - Manual (Page 25)

7ML19985BE02 SITRANS LU01 – INSTRUCTION MANUAL Page 19
mmm
mm
P
rogr
a
mming
Programming
Operator programmable features are identified by a Point Number and Parameter
Number. The Index refers to the Relay Number as identified by the Index Type indicators.
Parameter Numbers have a preset Parameter Value for each Index Number.
Program the SITRANS LU01 to obtain the desired RUN mode operation.
Display
In PROGRAM mode, the Index Type, Index Number, Parameter Number, and Parameter
Value (as well as a variety of other programming information) may be viewed.
Note that many indicators are specific to certain programming conditions and therefore,
all indicators are not displayed at any given time.
Display Segment Description
Parameter Number the programmable feature the Parameter Value refers to.
Index Type see chart below
Index the relay the Parameter Value refers to.
Parameter Value
the current value of the Parameter Number for the Index num-
ber displayed.
Percent indicates the Parameter Value is displayed in percent.
Invalid Entry
indicates the value entered is questionable. The unit will not
accept values out of range.
Auxiliary Function
indicates Auxiliary Function access (applies to only some
Parameter Numbers).
Scroll Access Tag indicates the Parameter Value may be scroll accessed.
Program Mode indicates PROGRAM mode is accessed.
Icon Index Type
measurement point or transducer
relay
secondary index
mA output
1 2 3 4
index parameter value units
auxiliary
function
relay in
service
program
mode
parameter
number
invalid
entry
scroll access
tag
transducer
index type
relay
analog output
TS-3
index