Sony OXF-R3 - Manual (Page 225)

Chapter 6 Technical Descriptions
6-63
Chapter 6 Technical Descriptions
Jog Wheel functions
The Jog Wheel can be used for various functions which are set using the
{JOG} key on the Control Keyboard. Pressing {JOG} will cause the current
Jog Knob function to be displayed in the Command Line bar at the bottom
of the central LCD screen situated above the Control Keyboard. Further
presses will cycle through the Jog Wheel functions one at a time. Display
the function required. No further action is necessary.
Note:
1 The Jog Wheel works for the Master Machine only during transport control.
2 The transport keys 0 and ) light up amber for normal operation but
light green during operations involving the Jog Wheel.
The Jog Wheel functions are as follows:
Jog
Rotating the Jog Wheel will cause the tape to move in the direction of
rotation and in relation to the speed of rotation. The tape motion will stop
once the Jog Wheel is released.
Crawl
Crawl causes the tape to shuttle progressively faster according to the
rotation of the Jog Wheel, but only during rotation.
Shuttle
Rotating the Jog Wheel will cause the tape to roll progressively faster in
the direction of rotation up to Fast Forward and Rewind speeds. The
motion is retained when the wheel is released. To stop the tape either
rotate the wheel in the reverse direction and return to the null point or
press the transport
p key which will redefine the null point to the current
position.
Data +/-
Adjustments may be made to numerical values such as timecode according
to the placement of the orange highlight in the central LCD screen. This
function applies to any pop-ups where numerical values can be set such as
timecode and dBs.
Off
Jog function not operational.