Sony OXF-R3 - Manual (Page 364)

7-104
Chapter 7 Session Management
Chapter 7 Session Management
7-11 Preferences
MUTE CHAN SENDS ON LOAD
• Mutes the Channel Sends for the channels affected by the loading of a
Snapshot or Mix.
MUTE ON FULL LOADS
• Mutes Channel Outputs, Multitrack Sends, Inputs and Sends for all
channels during the loading of a full Snapshot or Mix, according to the
individual options selected above.
TO TOP ON DROP IN
• With the TO TOP button on, any controls dropped in to automation write
in Abs or Trim will have their settings propagated to the Start Time or
‘top’ of the Title, from the point of drop in.
• Selecting NO for this option will cause settings to be propagated from the
point of dropping out.
JOG Tab
ROTATIONAL SENSE
• Sets the rotational direction of Jog Wheel:
0 - suitable for digital machines
1 - analogue tape machines, where it follows the direction of tape spools.
DEFAULT MODE
• Sets the mode for the Jog Wheel when the system is booted:
0 = Off
1 = Jog Mode
2 = Crawl Mode
3 = Shuttle Mode
4 = Data (+/-) Entry Mode
JOG TRIGGER
• Sets the sensitivity to movement for Jog mode, 1 being the most sensitive
and 100 being the least sensitive.
JOG SPEED
• Sets the ratio of Jog Wheel rotation against that of the machine for Jog
mode. The 1 setting gives the finest control and 15 is coarse.
CRAWL TRIGGER
• Sets the sensitivity to movement for Crawl mode, 1 being the most
sensitive and 20 being the least sensitive.
CRAWL SPEED
• Sets the ratio of Jog Wheel rotation against that of the machine for Crawl
mode. The 1 setting gives the finest control and 20 is coarse.