Sony OXF-R3 - Manual (Page 370)

7-110
Chapter 7 Session Management
Chapter 7 Session Management
7-11 Preferences
2
Click on the button to the right of the MODE legend to set the status of
the local OXF-R3, which can be the Master, Client or Disabled. The
local system will then seek and set up appropriate communications.
3
In the TRANSMIT CHANNEL MASK section, select the range of
channels that data will be transmitted from for the local system. Set the
START CHAN and the END CHAN, by clicking on the 4 and $
arrows.
4
A further option in the TRANSMIT CHANNEL MASK field at the
left, allows individual channel and centre section components to be
specified. Clicking on ALL will highlight every component whilst
clicking on NONE will de-select them all. They can also be selected
individually, turning them on or off, from either starting point.
5
In the RECEIVE CHANNEL MASK section, select the range of
channels that data will be received from for the remote system. Set the
START CHAN and the END CHAN, by clicking on the 4 and $
arrows.
Command Dialogue
At the base of the screen, the User Command Dialogue Line bar displays
commands from the dedicated Control Keyboard and QWERTY Keyboard
for confirmation before {ENTER}.
Menu options
Menu options available using the softkey functions displayed at the foot of
the Network Administration screen page are as follows:
4 - Selects the previous screen page.
PROJECTS - Selects the ARTISTS/PROJECTS & TITLES
page directly.
MIXES - Selects the MIXES & CUES page for all mixing
functions.
MACHINES - Selects the MACHINES set-up parameters page.
REMOTES - Selects the MACHINE REMOTES assignment
matrix.
SNAPSHOT - Selects the SNAPSHOTS, COPY & LINK page.
BACKUPS - Selects system BACKUPS functions.
SCREEN - Selects pop-up showing all available
screen selections. Click on any one to select it.