Sony OXF-R3 - Manual (Page 44)

3-18
Chapter 3 Getting Started
Chapter 3 Getting Started
3-10 Basic Console Operations 3-10 Basic Console Operations 3-10 Basic Console Operations
General
The following series of illustrations and brief step by step procedures are
designed to allow new OXF-R3 operators to begin using the console in a
very short space of time, without having detailed knowledge of the system.
System Set-up
The examples shown assume that signal sources, such as microphones, line
level signals and multitrack or hard disc recorder, are already connected
and routed to appropriate inputs, with machine control in place. They also
assume that the control room monitor LS are hooked up to the OXF-R3
system.
Main Bus Set-up
The Main Output Bus can be set for the following ‘widths’: Stereo, LCRS,
5.1 and 7.1. For the purposes of the examples, the fire-up default of Stereo
will be assumed.