Sony OXF-R3 - Manual (Page 254)

6-92
Chapter 6 Technical Descriptions
Chapter 6 Technical Descriptions
6-4 Meter Bridge
6-4-2 Stereo Centre Section Meters
SUPER SEND GROUPS and SEND OUTPUTS Meters block
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
1 6
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
1 6
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
16
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
16
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
1 6
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
1 6
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
16
12
8
4
0
OVER
5 0
SEND
SSG
R L L / O
G E C L
6 0
4 0
3 2
2 4
2 0
16
12
8
4
0
OVER
5 0
CENTRE SECTION METERS
The meters in the centre section consist of two sets of
8 stereo meters, one set each side of a central stereo
meter. They can be switched to monitor a number of
sources and their function also depends on whether the
Main Output Bus is set for Stereo or Surround
operation.
Left set of 8 Meters
The left hand 8 meters will display the output levels of
SSGs 1-16 and Sends 1-24 according to the meter
selector on the Monitor panel, described in section
6-3-2. This is irrespective of whether Stereo or
Surround is in operation.
Right set of 8 Meters
The sources for the right hand 8 meters depend on
whether the Main Output Bus is set for Stereo or
Surround:
• Stereo Main Output
Indicate output level for SSGs 1-16 and Sends 1-24
according to the meter selector on the Monitor panel,
described in section 6-3-2.
• Surround Main Output
Indicate output levels for the Main Output Bus.
Central Stereo Meter
The source for the Central Stereo Meter is dependent
upon whether the {MAIN} or {FOLLOW MONITOR} is
selected under the METERS heading at the top right of
the central monitor panel:
• {MAIN}
Can indicate the L and R signals from the Main
Output Bus or L and R from the Fold-Down Matrix.
This option is set in the PREFERENCES GUI
described in section 5-2-5.
• {FOLLOW MONITOR}
Indicates the L and R signals from the Main Output
Bus or the L & R signals selected as monitor sources
for the CR Monitor LS.