10-4 to monitor signals to and from tape – Sony OXF-R3 User Manual
Page 48
Advertising
3-22
Chapter 3
Getting Started
Chapter 3 Getting Started
3-10 Basic Console Operations
1
Press {ACCESS} for the desired Channel.
2
Select {CHANS} on the Select To Faders panel
(fire-up default).
3
At the Input Channel & Inserts panel, select
‘MULTI’ in window number 4 using the { + } and
{ – } buttons either side. Select its large { IN }
button to insert the multitrack into the signal path.
4
At the Pans panel, press {SEND} to select the signal
being fed to tape
3-10-4 To Monitor Signals To and From Tape
5
Or press {SEND} to select the signal from tape.
6
Open the Main Fader and turn up the CR Monitor
level.
7
Use the Channel Fader to adjust monitor level via
the Main Output Bus.
1
2
4
7
6
5
3
Advertising