Siemens Industrial Ethernet Switches SCALANCE X-200 User Manual
Scalance x-200, Simatic net, Industrial ethernet switches
Advertising
Table of contents
Document Outline
- 1 Safety notices
- 2 Network topologies / media redundancy
- 3 Product properties
- 3.1 Overview of the product characteristics
- 3.2 Components of the product
- 3.3 Unpacking and checking
- 3.4 SCALANCE XF204
- 3.5 SCALANCE X208
- 3.6 SCALANCE XF208
- 3.7 SCALANCE X216
- 3.8 SCALANCE X224
- 3.9 SCALANCE X204-2 / SCALANCE X204-2TS
- 3.10 SCALANCE XF204-2
- 3.11 SCALANCE X206-1
- 3.12 SCALANCE XF206-1
- 3.13 SCALANCE X212-2
- 3.14 SCALANCE X204-2LD
- 3.15 SCALANCE X206-1LD
- 3.16 SCALANCE X212-2LD
- 3.17 SCALANCE X202-2IRT
- 3.18 SCALANCE X204IRT
- 3.19 SCALANCE XF204IRT
- 3.20 SCALANCE X204 IRT PRO
- 3.21 SCALANCE X202-2P IRT PRO
- 3.22 SCALANCE X201-3P IRT PRO
- 3.23 SCALANCE X202-2P IRT
- 3.24 SCALANCE X201-3P IRT
- 3.25 SCALANCE X2004P IRT
- 3.26 C-PLUG (configuration plug)
- 3.27 Button
- 3.28 Displays
- 4 Installation
- 5 Connection
- 6 Configuration / diagnostics using remote mechanisms
- 6.1 Assignment of an IP address
- 6.2 Updating the firmware with the boot loader
- 6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
- 6.3.1 Principle of Web Based Management
- 6.3.2 LED simulation
- 6.3.3 Working with WBM
- 6.3.4 Command Line Interface (CLI)
- 6.3.5 WBM menus
- 6.3.5.1 Management menus - the Start menu
- 6.3.5.2 The "System" WBM menu
- 6.3.5.3 "System C-PLUG" WBM menu
- 6.3.5.4 The "System I&M" WBM menu
- 6.3.5.5 The "System Restart & Defaults" WBM menu
- 6.3.5.6 The "System Save & Load HTTP" WBM menu
- 6.3.5.7 The "System Save & Load TFTP" WBM menu
- 6.3.5.8 The "System Version Numbers" WBM menu
- 6.3.5.9 The "System Passwords" WBM menu
- 6.3.5.10 The "System Select/Set Button" WBM menu
- 6.3.5.11 The "System Event Log" WBM menu
- 6.3.5.12 The "X200" WBM menu
- 6.3.5.13 The "X200 Fault Mask" WBM menu
- 6.3.5.14 The "X200 Ring" WBM menu
- 6.3.5.15 The "X200 Standby" WBM menu
- 6.3.5.16 The "Agent" WBM menu
- 6.3.5.17 The "Ping" WBM menu
- 6.3.5.18 The "Agent SNMP Config" WBM menu
- 6.3.5.19 The "Agent SNMP Trap Config" WBM menu
- 6.3.5.20 The "Agent SNMP Config Groups" WBM menu
- 6.3.5.21 The "Agent SNMP Config Group Table" WBM menu
- 6.3.5.22 The "Agent SNMP Config Users" WBM menu
- 6.3.5.23 The "Agent SNMP Config User Table" WBM menu
- 6.3.5.24 The "Agent Event Config" WBM menu
- 6.3.5.25 The "Agent E-Mail Config" WBM menu
- 6.3.5.26 The "Agent Time Config" WBM menu
- 6.3.5.27 The "Switch" WBM menu
- 6.3.5.28 The "Switch Ports" WBM menu
- 6.3.5.29 The "Switch Port Diags" WBM menu
- 6.3.5.30 The "Switch FDB" WBM menu
- 6.3.5.31 The "Switch ARP Table" WBM menu
- 6.3.5.32 The "Switch LLDP" WBM menu
- 6.3.5.33 The "Switch DCP" WBM menu
- 6.3.5.34 The "Switch POF" WBM menu
- 6.3.5.35 The "Loop Detection Config" WBM menu
- 6.3.5.36 The "Statistics" WBM menu
- 6.3.5.37 The "Statistics Packet Size" WBM menu
- 6.3.5.38 The "Statistics Packet Type" WBM menu
- 6.3.5.39 The "Statistics Packet Error" WBM menu
- 6.3.6 SNMP
- 7 IRT technology with SCALANCE X-200
- 8 PROFINET IO functionality
- 9 Approvals and markings
- 10 Technical specifications
- 11 Accessories
- 12 References
- 13 Dimension drawings