Sony SRP-X700P - Manual (Page 28)

28
6-2 Setup for input level by using Trim
8) Set up microphone input TRIM on INPUT SCREEN by clicking +
or – button by talking into a microphone in the usual manner of operation.
Set so that 0 VU of the input level meter often lights.
NOTE: If a tuner module (WRU-806 and UWP-X) is inserted, the TRIM
function is not applied.
9) Set all microphone inputs up as
process of 1) above
P.S.
An automatic mixing function in this unit sees each microphone level after Trim and before
Faders.
10) Set up TRIM of line input on INPUT SCREEN by
clicking + or - button, so that 0 VU of the input level
meter often lights when playing a DVD, MD etc.
11) Set all line inputs using process
above.