SBE HighWire HW400c/2 - Manual (Page 12)

HighWire HW400c/2 User Reference Guide Rev 1.0
Conventions
The following conventions are used in this document:
A # following a signal name, e.g., INTA#, represents an active low signal.
A / preceding a signal name, e.g., /INTA represents an active low signal.
0x preceding a number represents a Hexadecimal value.
A number in “ ” preceded by H represents a Hexadecimal value.
A number in “ ” preceded by B represents a Binary value.
A register or bit name that ends with _EN indicates an enable function
A register or bit name that ends with _N indicates an asserted low function
Typeface courier is used to designate code and/or terminal input.
Draws attention to important information related to the nearby text.
! Refers to information about potential hazards to equipment or personnel.
October 10, 2006 Copyright 2006, SBE, Inc. Page xii