SBE HighWire HW400c/2 - Manual (Page 95)

HighWire HW400c/2 User Reference Guide Rev 1.0
HDLC support module revision 1.17
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Building Number Three Ltd & Jan "Yenya" Kasprzak.
RAID: Version 2.4 Build 5go
ip_conntrack version 2.1 (2048 buckets, 16384 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[email protected]>.
tocol family 17
Sending BOOTP requests . OK
=
Looking up port of RPC 100003/2 on 10.0.0.5
ooking up port of RPC 100005/1 on 10.0.0.5
FS: Mounted root (nfs filesystem).
nel memory: 128k init
booting
k ]
k ]
k ]
device nodes ... [ ok ]
* Seeding /dev with needed nodes ... [ ok ]
* Setting up proper hotplug agent ...
* Setting
i d k ]
* Starting udevd ... [ ok ]
* Populating /dev with existing devices with udevstart ... [ ok ]
* Letting udev process events ... [ ok ]
* Finalizing udev configuration ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Activating (possible) swap ... [ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Setting hostname to localhost ... [ ok ]
* Calculating module dependencies ... [ ok ]
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Activating (possibly) more swap ...swapon: /dev/sda2: No such device or
address [ !! ]
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* Caching service dependencies ... [ ok ]
* Caching service dependencies ... [ ok ]
* Caching service dependencies ... [ ok ]
* Loading key mappings ... [ ok ]
* Setting terminal encoding to UTF-8 ... [ ok ]
* net.eth0: cannot start until the runlevel boot has completed
* Starting lo
* Bringing up lo ... [ ok ]
NIT: Entering runlevel: 3
]
]
* Keeping current configuration for eth0 [ ok ]
[ ok ]
* Setting system clock ...Sat Jan 1 01:01:00 PST 2005 [ ok ]
* Starting sshd ... [ ok ]
[ ok ]
* Starting [ ok ]
his is localhost.(none) (Linux ppc 2.6.9) 11:09:54
ocalhost login:
Linux port (c) 1998
Loading Adaptec I2O
Detecting Adaptec I2O RAID controllers...
megaraid cmm: 2.20.2.0 (Release Date: Thu Aug 19 09:58:33 EDT 2004)
megaraid: 2.20.4.0 (Release Date: Mon Sep 27 22:15:07 EDT 2004)
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered pro
IP-Config: Got BOOTP answer from 10.0.0.5, my address is 10.0.0.10
IP-Config: Complete:
device=eth0, addr=10.0.0.10, mask=255.255.255.0, gw=10.0.0.2,
host=10.0.0.10, domain=, nis-domain=(none),
bootserver=10.0.0.5, rootserver=10.0.0.5, rootpath
L
V
Freeing unused ker
INIT: version 2.86
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2
* Mounting proc at /proc ... [ o
* Mounting sysfs at /sys ... [ o
* Mounting /dev for udev ... [ o
* Populating /dev with saved
/sb n/udevsen as hotplug agent ... [ o
* Initializing random number generator ... [ ok ]
I
* Caching service dependencies ... [ ok
* Starting eth0 [ ok
local ...
T
l
October 10, 2006 Copyright 2006, SBE, Inc. Page 83