SBE HighWire HW400c/2 - Manual (Page 43)

HighWire HW400c/2 User Reference Guide Rev 1.0
The Link/Activity/Speed LED indication is as follows:
n when the network link is up
• blinking at 3 Hz for 10 Mb/s Tx or Rx;
or 1000 Mb/s Tx or Rx.
An optional front panel 2-high LED is provided as a status indicator for the Ethernet
re shown as LEDs C and D in Figure 3, and by default are
not present. The left LED indicates Link/Activity/Speed and the right LED indicates
ollision detection for the selected port. A port is selected by setting the appropriate
on setting the LED modes.
• solid gree
• blinking at 6 Hz for 100 Mb/s Tx or Rx;
• blinking at 12 Hz f
ports. The optional LEDs a
C
CPLD bit. The default selection (when present) is the Marvell MV64462 System
Controller MAC.
See Section 4.2 for details
October 10, 2006 Copyright 2006, SBE, Inc. Page 31