SBE HighWire HW400c/2 - Manual (Page 17)

HighWire HW400c/2 User Reference Guide Rev 1.0
2.5 Returns/Service
Before returning any equipment for service, you must obtain a Return Material
Authorization (RMA) number from SBE:
TEL: 800-925-2666 (Toll free, USA)
TEL: +925-355-2000 (Outside of USA)
FAX: +925-355-2020
Ship all returns to SBE’s USA service center:
SBE, Inc.
4000 Executive Parkway, Suite 200
San Ramon, CA 94583
SBE’s Technical Support Department can be reached at 800-444-0990.
2.6 Operating Environment
The HW400c/2 is designed to function within the environment shown in Table 1.
Table 1. HW400c/2 Operating Environment
Storage temperature -40 to +85 C (-40 to +185
°F)
Operating temperature: 0 to 55
°C (32 to 131 °F) ambient temperature with a minimum
of 200 LFM airflow (basic configuration)
Operating humidity: 10% to 90% non-condensing
Storage humidity: 5% to 95% non-condensing
Power requirements: 36.5 Watts max. (estimated, basic configuration)
Voltages: 5V +5%/-3%, 3.3V +5%/-3%, 12V
±5% (all required)
Bring the HW400c/2 board to operating temperature in a non-condensing
environment. The rate of change in board temperature should not exceed
!
2
°C (35.6 °F) per minute.
October 10, 2006 Copyright 2006, SBE, Inc. Page 5