SBE HighWire HW400c/2 - Manual (Page 52)

HighWire HW400c/2 User Reference Guide Rev 1.0
Figure 13 ram
Table 22. GPIO Port Assignments for IPMI
GPIO Port I/O Description
. IPMI Block Diag
GPIO_00 Input /PWRON monitor (active low)
GPIO_01 Input HEALTHY monitor (active high)
GPIO_07 Output Blue LED control (low = on, high = off)
GPIO_12 Input Watchdog Timer Expired (active low)
GPIO_13 Output Board Reset control (active low)
GPIO_14 Input
Ejector Latch monitor, L_STAT
(low = closed, high = open)
GPIO_15 – GPIO_19 Inputs Geographical Address bits 4 – 0
GPIO_20 – GPIO_23 Inputs Boot Status bits 3 – 0
3.6.2 Temperatu
rt 1 on the Zircon PM. The 1.1V (MPC744X core
oltage), 2.5V, 3.3V, 5V and other supply voltages are connected to A/D input ports
on the Zircon PM through precision voltage-divider networks. These connections
(see Table 23 and Table 24) allow remote monitoring of the temperatures and
voltages on the HW400c/2 by a system management device (shelf manager).
re and Voltage Monitor
IPMI functions implemented on the HW400c/2 include board temperature sensors
TS0 and TS1 connected to I
2 C Po
v
October 10, 2006 Copyright 2006, SBE, Inc. Page 40