Errors, Temperature exceeded, To resolve the temperature exceeded error – Smart Technologies Smart Board 560 and 580 Interactive Whiteboards And UF55 Projectors 99-00964-20 User Manual
Page 42
Message
Power LED
(Green/Amber)
Temperature LED
(Red)
Idle mode
Solid amber
Off
Powering
Flashing green
Off
On (Lamp On)
Solid green
Off
Cooling
Flashing amber
Off
Error (Temperature Exceeded)
Off
Flashing red
Error (Fan Failure)
Off
Solid red
Error (Color Wheel Failure)
Off
Solid red
Error (Lamp Failure)
Solid amber
Flashing red
32
Troubleshooting Your Interactive Whiteboard System
99-00964-20 A0
Errors
Temperature Exceeded
If the Temperature Exceeded indicator message appears, and your projector turns off during use, one of the
following issues is occurring:
•
Your projector has overheated internally. The projector can overheat due to a blocked air intake or
exhaustor and ambient temperature over 55°C.
•
The temperature outside your projector is too high.
1.
Wait 15 minutes for the projector to cool down before attempting to restart.
2.
Make sure that nothing is blocking the air intake and exhaust.
3.
Disconnect the power cable from the power outlet.
4.
Reconnect the power cable.
5.
If the previous steps don’t resolve the issue and your projector still doesn’t turn on, disconnect the power
cable, and then cont
To resolve the Temperature Exceeded error