Fan failure, To resolve your fan failure error, Color wheel failure – Smart Technologies Smart Board 560 and 580 Interactive Whiteboards And UF55 Projectors 99-00964-20 User Manual
Page 43: To resolve the color wheel failure error, Lamp failure, To resolve your lamp failure error
99-00964-20 A0
Troubleshooting Your Interactive Whiteboard System
33
Fan Failure
If the Fan Failure indicator message appears and your projector turns off during use, one of the following issues
is occurring:
•
One of the fans has failed.
•
Your projector is overheating internally.
Disconnect the power cable and then contact your
Color Wheel Failure
If the Color Wheel Failure error message appears, and your projector turns off during use, your projector has an
internal problem.
To resolve the Color Wheel Failure error
1.
Disconnect the power cable.
2.
Connect the power cable.
3.
If the previous steps don’t resolve the issue, disconnect the power cable, and then contact your
Lamp Failure
If the Lamp Failure indicator message appears and the lamp turns off during use or won’t turn on,
one of the following issues is occurring:
•
Your lamp over-heated (the lamp can overheat due to a blocked air intake or exhaustor).
•
The lamp temperature is too high.
•
You need a new lamp because the lamp has reached the end of its life.
•
Your projector has an internal problem.
1.
Disconnect the power cable.
2.
Connect the power cable.
3.
If the previous steps don’t resolve the issue, the lamp might be at the end of its life. See pages 47 to 56
or go
formation.
4.
If your projector still doesn’t turn on, disconnect the power cable, and then contact your
To resolve your Fan Failure error
To resolve your Lamp Failure error