Smart Technologies Smart Board 560 and 580 Interactive Whiteboards And UF55 Projectors 99-00964-20 - Manual (Page 63)

99-00964-20 A0 Appendix B: Replacing Your UF55 Projector Lamp 53
3. Pull up on the handle of the old lamp.
Don’t touch any part of the lamp except
the housing.
4. Remove the old lamp. Recycle or dispose
of the old lamp according to your local
waste authority.
5. Remove the new lamp from all of
its packaging.
6. Put the new lamp into the lamp slot, and
push it all the way down. Tighten the lamp
locking screws until the new lamp
is secure.