Smart Technologies Smart Board 560 and 580 Interactive Whiteboards And UF55 Projectors 99-00964-20 - Manual (Page 57)

99-00964-20 A0 Appendix B: Replacing Your UF55 Projector Lamp 47
Appendix B: Replacing Your UF55 Projector Lamp
This appendix has detailed instructions on how to replace your projector lamp. Topics include the following:
• Replacing the Projector Lamp (this page)
– Removing the Projector from the Boom (page 49)
– Replacing the Projector Lamp Module (page 52)
– Re-attaching the Projector (page 54)
– Resetting the Lamp Timer (page 57)
Replacing the Projector Lamp
If a lamp fails, or if a replacement message appears on the screen of the UF55 projector, a qualified person can
replace the projector lamp. Don’t access the service panel without a replacement lamp and instructions in hand.
WARNING
NOTE: Ensure that you remove the plastic lens cover from the projector.
Do not attempt to service the projector other than performing routine lamp replacement. Service
should be performed only by an authorized service provider. Other than the lamp module, there
are no user-serviceable parts inside the unit.