Siemens 2060isdn - Manual (Page 10)

Installation
10
I_KAP01.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Connecting the base station
Place the base station on a convenient worktop and pro-
ceed as follows:
1. Insert the Mini-Western plug of the telephone cable
(ISDN cable) into the socket marked “L1” (underside
of the base station, see ➀ in illustration below).
2. Insert the Mini-Western plug of the AC power adapter
cable into the socket marked “$” (underside of
base station, see ➁ in illustration below).
3. Push the cables into their slots.
4. Connect the Mini-Western plug of the telephone ca-
ble (ISDN cable) to the telephone jack (IAE).
5. Plug the AC power adapter into the 220/230V mains
socket.
● Your telephone system will not work if the
mains power supply fails or if the AC pow-
er adapter is not plugged into the mains
socket.
● Use only the AC power adapter
No. C 39280-Z4-C65 supplied with the base
station.
● Make sure you connect the telephone cable
and the AC power adapter to the correct
sockets in the base station. The base sta-
tion will not work and may be damaged if
you connect the cables to the wrong sock-
ets.
12
0
m
m
➀
➁