Siemens 2060isdn - Manual (Page 26)

Basic settings
26
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Activating/deactivating call waiting per user
If call waiting is activated for one or more internal users
and both channels are busy, a call-waiting tone draws at-
tention to the next incoming call. You have the choice of
terminating the ongoing call and accepting the waiting call
(➔ page 26) or rejecting the waiting call.
You must obtain the corresponding service from your net-
work provider in order to use this function.
t Meaning: see footnote
Activating/deactivating automatic line seizure
You are immediately assigned an external line when you
press the Line key (default). If this function is deactivated
you are prompted to seize a line by pressing
x (not in en-bloc dialing mode). MSNs are avail-
able for line seizure, if entered (➔ page 14).
t Meaning: see footnote
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Call waiting STN
x Press OK if you merely want to check the setting.
@,...9 Activate or deactivate call waiting by deleting with the
softkey or entering the internal numbers.
x
Save the setting.
OK
X
SAVE
EXT
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Autom.seizure
x List of internal numbers is displayed. Press OK if you
merely want to check the setting or
@ ... 9 Delete with the softkey and enter the internal num-
bers of your choice for automatic line seizure.
x
Save the setting.
OK
X
SAVE
t means: browse withu or u and press x to confirm Z NEXT OK