Siemens 2060isdn - Manual (Page 41)

Switching functions
41
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Ending toggle mode:
t Meaning: see footnote
You can continue your call with the first external user.
Three-party conference
While a consultation call is in progress you have the
option of setting up a three-way conference between
yourself and the two other parties. Display of charge
units or call duration is suppressed while this function is
active.
External call with simultaneous internal/external consultation:
Ending the three-way conference
.t Resume
or
a Press this key or return the mobile unit to the charging
unit. You receive a recall which you answer, thus resum-
ing the original call.
You can toggle between an internal call and an
external consultation call in the same way. You
can also toggle between calls by selecting “In-
ternal” from the menu and pressing the # key.
You can also turn a consultation call into a three-
way conference.
• You are conducting an internal/external consultation call
and the external partner is on hold.
x Press this softkey to start a three-way conference.
CONF.
x
or R Press either of these keys. You resume the original ex-
ternal call.
or
a Press this key or return the mobile unit to the charging
unit to disconnect from both partners.
CONF.END
t means: browse withu or u and press x to confirm Z NEXT OK