Siemens 2060isdn - Manual (Page 50)

Locks
50
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
This is the menu for defining lock numbers. The options at
your disposal are as follows:
Delete all lock numbers
Use this function to delete all lock numbers at once.
t Meaning: see footnote
All lock numbers for all internal users are deleted at once.
The “Entries deleted” messages appears for 2 seconds
by way of confirmation.
Blocking unwanted calls
You can enter up to three phone numbers, each up to 16
digits long, to determine which users can reach you. Calls
from users with phone numbers other than these num-
bers are not put through to you.
A message indicating that this lock is activated appears on
the mobile-unit display.
This lock can be circumvented if the calling party has sup-
pressed transmission of the phone number to you (Glos-
sary, ➔ page 98), or if the call is from a non-ISDN user.
It is advisable to activate phone number display as a better
way of checking the origin of incoming calls.
t Lock int2 Select the internal user (for example “Lock int2”) to
whom the function will apply.
t Lock on Activate/deactivate call barring by lock numbers.
When you select “Lock on”, the message “call barr. Nos.
for int2 activated” is displayed briefly.
t Lock No. list Check/change lock numbers.
Once you have selected a lock number you can check or
change it.
t New entry Add a new lock number.
t Delete lock No. Delete individual lock numbers. Select an entry: the lock
number you select is deleted when you confirm your
choice.
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Call barring t Delete all
t means: browse withu or u and press x to confirm Z NEXT OK