Siemens 2060isdn - Manual (Page 86)

Multicell system
86
I_KAP05.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Setting automatic base station selection
If you have a configuration with more than one base sta-
tion you can determine the base station to which your mo-
bile unit connects. You need automatic base station selec-
tion for multicell operation.
t Meaning: see footnote
Once you have set this option the station name is preced-
ed by a star (*) in the display.
You must set automatic base station selection for each
base station in your multicell system.
You can configure a multicell system with up to six base
stations operating via a point-to-multipoint access.
Ž The comfort mobile unit is idle.
.t Select station Station 1 t Preferred search Z W
● You can operate only registered mobile
units at a base station.
● The text “* Station 1” flashes if radio con-
tact to the base station is lost and while the
mobile unit is searching for a base station.
● You can be reached via the base station at
which your mobile unit is registered.
t means: browse withu or u and press x to confirm Z NEXT OK