Siemens 2060isdn - Manual (Page 54)

System settings
54
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Activating/deactivating permanent DTMF dialing
You can permanently activate tone dialing on connection
in order to avoid the necessity of switching temporarily to
DTMF for using telephone services or accessing answer-
ing machines (➔ page 37).
t Meaning: see footnote
Enabling/disabling trunk hold
Trunk hold is enabled by default.
Enabling/disabling dial * and #
The use of “*”and “#” is enabled by default.
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Auto. DTMF
u x
Toggle to “enabled” or “disabled” (default is “enabled”)
and confirm your choice.
NEXT OK
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Trunk hold
u x
Toggle to “enabled” or “disabled” and confirm your
choice.
NEXT OK
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Device data t Dial * and #
u x
Toggle to “enabled” or “disabled” and confirm your
choice.
NEXT OK
t means: browse withu or u and press x to confirm Z NEXT OK