Siemens 2060isdn User Manual
Page 24
Basic settings
24
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
Setting point-to-point
You can use this mode with your Gigaset 2060isdn, but
you must obtain the point-to-point access from your net-
work provider, who also provides the requisite network
terminator.
When configured in this way your Gigaset 2060isdn is
compatible only with a point-to-point access installed by
your network provider.
t
Meaning: see footnote
After confirming - and thus activating - “Point to P.”, select:
Use the
softkey to check the entries and the
softkey to save the new entry or change.
Ž
The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service
t System settings t Configuration
t Point to P.
t P/P phonenumber
Enter the full point-to-point phone number:
o
International code
(e. g. 0044 for UK),
o
followed by the local code (e.g. 171 for London)
o
and the phone number you received from your network
provider.
The phone number cannot be more than 10 dig-
its in length.
If you change to point-to-point you must re--ini-
tialize the base station by unplugging the AC
adapter from the mains socket and then recon-
necting to the power supply. For more details on
point-to-point operation, ➔ page 17 and ➔ page
81.
OK
SAVE
t means: browse withu
or
u
and
press x
to confirm
Z
NEXT
OK