Siemens 2060isdn - Manual (Page 47)

Call charges, call duration
47
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Activating/deactivating display of call duration or charges/setting call
charge factor
Your Gigaset 2060isdn can display either the telephone
time units or call charges or the duration of the call. Call-
duration display is active by default.
If you need call charges displayed or logged, you must ob-
tain the appropriate call data logging function from your
network provider. Bear in mind, however, that for billing
purposes the units counter of the network provider is al-
ways binding.
The display mode you select is valid for all mobile units.
t Meaning: see footnote
This is the menu for choosing display of call duration or
call charges. The options at your disposal are as follows:
Ž The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.t Service t System settings t Duration/units
t Call duration Activate/deactivate display of call duration
This is a toggle: by activating call-duration display you au-
tomatically deactivate display of call charges.
t Units/charges Activate/deactivate display of charge units
This is a toggle: by activating charge-unit display you auto-
matically deactivate display of call duration.
t Chge. unit –.–– Select charge factor with decimal point
Every time you change the charge factor the
charge totals are reset to zero.
Consequently, you should change the factor only at the
end of an accounting period.
t Chge. unit – – – Select charge factor without decimal point
Every time you change the charge factor the
charge totals are reset to zero.
Consequently, you should change the factor only at the
end of an accounting period.
This is the mode for displaying charges in foreign currency
units.
t means: browse withu or u and press x to confirm Z NEXT OK