Siemens 2060isdn - Manual (Page 70)

Operation with supplementary devices
70
I_KAP04.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Activating “anonymous call” for a single call
This function enables you to prevent your phone number
being displayed for a single call which you are about to
make (if you have obtained the “case-by-case suppres-
sion of phone number” service from your network provid-
er).
Controlling answering machines/using telephone services
Once you have set up a connection you can use the key-
pad of the telephone to access an answering machine or
voice mailbox, for example, or use network-provider ser-
vices.
Without clearing down the call, you switch the keypad to
DTMF dialing (“Temp. tone”) as described below. You can
then use the keypad to enter the requisite information.
You also have the option of permanently activating DTMF
dialing in the connected state for the base station (➔ page
54).
When you conclude the call the temporary switch to
DTMF dialing is automatically cancelled.
c Lift the handset.
7 4 6 7 Press these keys in succession. Your phone number will
not be displayed when you place the next call.
0 Press to seize the trunk line.
o
Dial the external number. Your phone number is not dis-
played to the called party.
b You have set up an external connection.
7 1 7 Press these keys in succession. The change to DTMF di-
aling is effective.
a Replace the handset to terminate the call and reset the
dialing function.