Siemens 2060isdn - Manual (Page 20)

Operation with comfort mobile unit
20
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
Example: “External consultation in external call”
Menu structure for system settings
As a rule, you start from the idle state when you want to
change settings. There are some additional settings that
you can access in other states (see “Status-dependent
menus“ ➔ page 19).
You can proceed step by step to the setting of your
choice. Note that you can use the . key to move back-
wards through the menu levels (Main menu - Service -
System settings - Device data). This is a quick way of re-
turning from a particular menu through the hierarchy.
No matter where you are in the menu structure, if you
want to cancel without making changes all you have to do
is press the on-hook key a . Your comfort mobile unit will
cancel automatically if you wait for more than 30 seconds
without pressing a key.
Example:
If you want to activate call forwarding, you begin with the
telephone idle and press the . key, then proceed step
by step, selecting “Service” from the main menu, and
then ““Forwarding on” from the “Service” menu.
The illustration on the next page outlines the menu struc-
ture for system settings:
• You have an external call in progress.
.t Ext. consultat’n Set up the external consultation call.
. Call up the menu again and
Resume
Conference
Macro
Internal
Speaker volume
Telephone book
Keypad on
u x
choose a function.
NEXT OK
.t Resume
Select “Resume” from the menu if you want to resume
your original call. On the left here you can see the short-
form description of the procedure.