Siemens 2060isdn - Manual (Page 56)

System settings
56
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98 A30853-X210-B101-1-19
The access rights defined for internal users who receive
external calls must be “incoming only” or higher (➔ page
51). You can enter a maximum of 10 users, of which 8 can
be mobile units, in the list for collective call or the group
list for call forwarding no answer.
A user conducting an internal or external call receives the
call waiting tone (also ➔ page 26).
Collective call
● Collective call to all internal users is the default.
Internal users are automatically included in the collec-
tive call group when they are registered for the first
time. Subsequent changes are possible.
● An incoming external call is signalled at all registered
mobile units and devices and can be answered at any
mobile unit or device.
● You can have all incoming calls directed to a specific
internal user by entering only one internal number in
the collective call list.
● Group of users who participate in collective call.
Example:
Group call with extended ring no answer
An incoming external call is initially signaled to the users
in the first group, each of whom can answer the call. If no-
one in group 1 answers, ringing is automatically extended
to the members of group 2.
Example:
External phone num-
bers
Internal users corre-
sponding to these num-
bers
78901234
45678901
1
2, 3, 4
External phone Nos.
Corresponding internal users Extended ring on
no answer at Group 1 Group 2
78901234
456789001
2, 3
1
6, 7
4, 6
2, 3, 6, 7
1, 4, 6