Kohler custom Bodyspa 116347-2 - Manual (Page 15)

116347Ć2Ć AA (A) 16 Kohler Co., Kohler, WI
SOLVENT WELD TUBING
Solvent weld the PVC tubing connections, using
care to maintain the established drainage pitch in
the lines. Make sure each union connection
includes the required OĆring. Securely hand
tighten the union nuts.
Check Point #5
- Confirm that all previous check point requirements have been
met.
- Solvent weld all pvc tubing joints, and hand tighten the union
nuts with the OĆrings in place.
MAKE ELECTRICAL CONNECTIONS
WARNING: Risk of electrical shock. To
reduce the risk of electric shock, connect only to
a properly grounded, groundingĆtype receptacle,
protected by a GroundĆFault CircuitĆInterrupter
(GFCI). Do not remove the plug's grounding
pin. Do not use a grounding adapter.
The Kohler Custom BodySpa is equipped with a cord
and plug. All wiring of the pump has been completed
at the factory. A licensed electrician must install a
GFCIĆprotected, 120 V, 20 A, grounded outlet. Locate
the outlet behind the BodySpa, and within 24Ćinches
of the pump. Plug the BodySpa into this outlet. No
other load should be on this circuit.
INST
ALLA
TION