Kohler custom Bodyspa 116347-2 - Manual (Page 20)

116347Ć2Ć AA (A) Kohler Co., Kohler, WI 21
Check Point #8
- Finished basin, wall, and ceiling materials installed.
- Suction assembly installed, with silicone sealant applied to all the
threads and areas the suction flange contacts.
- Suction cover fits flat against finished basin wall.
- Silicone sealant fully cured.
INSTALL FAUCET TRIM, SPOUT, AND
DRAIN
CAUTION: Risk of property damage. You
must adequately seal the valve, spout, and other
plumbing fittings to prevent water leakage
behind the finished wall.
Install the faucet trim and spout according to the
manufacturer's instructions. Seal around the
plumbing fittings with a highĆquality sealant.
Install and connect the drain according to the
instructions packed with the drain.
Fill the footbath basin with water, and check for
leaks.
INSTALL THE DOOR ENCLOSURE
Install the door enclosure according to the
manufacturer's instructions. Follow all sealing
and installation instructions carefully to ensure
troublefree door operation and to limit moisture
and heat escape from around the door.
INST
ALLA
TION