Kohler custom Bodyspa 116347-2 - Manual (Page 28)

116347Ć2Ć AA (A) Kohler Co., Kohler, WI 29
LOOK AT THESE FEATURES
S Your Custom BodySpa is designed to stimulate,
invigorate, and energize your body for total
hydroĆmassage relaxation.
S Activate any or all of the Body Jet arrays or the
lighted, overhead Waterfall to personalize your
BodySpa experience.
S With BodySpa, you have complete freedom of
movement (and choice) to focus your
hydroĆmassage where you need it the most.
S BodySpa features an easyĆtoĆread electronic
keypad control. With it, you can individualize
each BodySpa experience by selecting the lighted,
overhead Waterfall or any combination of five
pairs of Body Jets. You can vary the intensity of
your BodySpa hydroĆmassage from gentle to
vigorous with the touch of a finger.
S The quiet but powerful 2Ćhorsepower pump and
motor combine to deliver up to 80 gallons of
water each minute to intensify your
hydroĆmassage bathing experience.
S The integral heater built right into the pump
housing helps maintain the temperature of the
water while your Custom BodySpa is running.
CARE AND CLEANING OF YOUR CUSTOM BODYSPA
FLUSHING YOUR CUSTOM BODYSPA
SYSTEM
Sanitize your Custom BodySpa system by flushing it
twice a month or more, depending upon usage.
1. Fill the footbath basin with hot water to a level
3Ćinches above the top of the suction cover.
2. Add 2Ćteaspoons lowĆfoaming dishwasher
detergent and 1/2Ćcup household bleach to the
water.
3. Run the BodySpa for 5 to 10 minutes in the
Waterfall mode; then another 5 to 10 minutes
with all ten Body Jets running at the same time.
Then shut off the BodySpa, and drain the water.
4. Fill the footbath basin with cold water to a level
3Ćinches above the top of the suction cover, and
run the BodySpa for another 5 to 10 minutes in
both the Waterfall and ten Body Jet modes. Drain
the footbath basin, and wipe it dry with a clean,
soft cloth.
USER'S
INFORMA
TION