Kodak 500 - Manual (Page 117)

5-32 A-61628 December 2011
9. Click Advanced.
The Advanced dialog box allows you to enter the information
required to access the printer driver on the shared PC. This
information will be used to install the printer driver on the Scan
Station.
10. Enter the fully qualified address of the PC sharing the printer (see
Step 1) including the share name (e.g. \\workgrouppc\BrotherH).
11. With the information in Steps 1 and 2, enter the driver name and the
port name in their respective fields.
12. Click OK on both the Advanced and Add: Printer dialog boxes.
The printer driver will be installed from the sharing PC. A connection
will be made between the printer and the Scan Station using the IP
address entered on the Add: Printer dialog box. After the initial
installation, the shared printer connection is no longer required and
the Scan Station will be able to communicate directly with the
network printer.
NOTE: If a printer fails to install, check the logfile for the error code.
Search for the error code on the Micosoft internet site.