Kodak 500 - Manual (Page 20)

A-61628 December 2011 3-7
9. After installing the application, the Kodak Scan Station 500/520EX -
Scanner Admin main screen will be displayed.
NOTE: The KSS500 - Scanner Admin main screen contains the specific
data to identify and connect to Scan Stations on a network.
Scanner Name — displays the name assigned to the Scan Station.
IP Address — displays the IP address that is associated with the Scan
Station.
DHCP — if the Scan Station is configured to retrieve the IP address
using DHCP this field will be checked, if the Scan Station is configured
to statically retrieve the IP address, this field will be blank.
HTTPS — select On if you want the Scan Station to use a secure
connection to communicate.
Mac Address — displays the unique identifier of the network adapter.
Status — displays the current status of the Scan station (i.e., idle,
scanning, updating, rebooting, etc.).
NOTE: When you press F5, the status of the registered scanners will be
refreshed.
Group — displays the group (i.e., location) that the Scan Station is part
of. This is set up when adding a scanner. To change this information,
click in the Group field and enter the desired information.
Last Command — displays the last command that was issued by the
administrator including the date, time and the success or failure of the
action performed.
Comments — any comments added by the administrator when a Scan
Station is added will be displayed in this column. To change this
information, click in the Comments field and enter the desired
information.