Kodak 500 - Manual (Page 81)

A-61628 December 2011 4-21
• Cropping — allows you to select either Automatic or
Aggressive cropping.
- Automatic: automatically detects the border of an image and
straightens it if necessary.
- Aggressive: automatically detects the border of an image,
straightens it if necessary, and eliminates any residual black
border on any image edges. In order to achieve this, there is
a possibility that a small amount of image data from the edge
of the document may be lost.
• Use Multifeed Ultrasonic Detection — multifeed ultrasonic
detection aids in document scanning by detecting documents
that may go through the feeder overlapped. Multifeeds can
happen due to stapled documents, adhesives on documents, or
electrostatically charged documents. Check this option if you
want the Scan Station to detect double-fed documents.
NOTE: If this option is on and a multifed document is detected,
the Scan Station will “ding”. The user will need to check
their scanned images to be sure they are correct. If
necessary, they may need to rescan the job
• Enable Auto-Orient — if enabled, the Scan Station will analyze
each document to determine how it was fed and will rotate the
image to the proper orientation.
• Reverse Page Order — if enabled, the Scan Station will reverse
the order of the scanned images from the order in which the
documents were scanned.
• Color Adjustments — when checked, displays the Color
Adjustments screen, which allows you adjust the Red, Green
and Blue color intensity. Values range from 1 to 100; 1 is the
lowest amount of color; 100 is the highest amount of color. The
default is 50.
2. Enable any of these options above and click Done.