Kodak 500 - Manual (Page 42)

A-61628 December 2011 3-29
11. Select Security Options to set the Security Type and/or
Certificate.
• Click Security Type to setup a secure connection to your active
directory server. Selections are: None, SSL or TLS.
• Click Certificate. The displayed dialog box will allow you to
select a certificate file or enter the full path to the desired
certificate file.
NOTE: Some certificates require a password. If your certificate
requires a password, enter the password.
12. Click Done.
13. When your LDAP connection is configured, select Test Connection
to test if your settings are correct. The Configuration Organizer will
test your settings and display a “Success” or “Failed” message. If
the test connection failed, verify that all of your settings are correct
and make any necessary changes, until a Success message is
displayed.
14. After running the test connection, click OK on the message box to
return to the LDAP Settings screen; then click Done to return to the
E-mail screen.