Kodak 500 - Manual (Page 55)

3-42 A-61628 December 2011
Allow Saving to USB Drive — allows you to disable scanning to a
USB drive. This may be useful in more secure environments where
tighter control is required.
Force User Login — when enabled, this option requires the user to
login before a scan session. At login, the user will have to enter user
name, password and domain. When Force User Login is checked, you
must configure LDAP settings. See the section entitled, “LDAP settings”
earlier in this chapter. To logout of the Scan Station, press the Stop/
Logout button (red X) on the Scan Station.
A default administrator account is available for logging onto the Scan
Station after enabling Force User Login. Initially the password will be
“blank” and is up to you to set this password to prevent user access to
administrative functions. For more information refer to the device
password option in the section entitled, “Device settings” earlier in this
chapter.
Allow Adding Pages To Scan Job — when enabled, the user can
continue to add pages to a scan job. After all pages in the input tray
have been scanned, a message will be displayed asking if they want to
add more pages. If the user selects Yes, the additional pages will be
scanned and the message will be displayed again until the user selects
No, or the 30-second timeout has occurred.
Hide Network Folder Location — enable this option to provide a more
secure environment by partially hiding the location of the network folder.
If this option is enabled, only the end of the network folder path will be
displayed on the Scan Station touchscreen. For example:
\\server\myfolder will be displayed as: ...\myfolder.