Kodak 500 - Manual (Page 99)

5-14 A-61628 December 2011
4. Select the desired Protocol option: FTP, FTPS or SFTP.
• If you select FTP the following options are available:
- If the FTP site communicates on a port other than Port 21,
change the value using the up and down arrows.
- You may optionally select Passive if required by the FTP
server. Passive is most commonly used if the FTP site is
outside the firewall.
• If you select FTPS the following options are available:
- FTPS servers will allow secure (encrypted) communications
when Explicit and Port 21 is selected. Any other combination
of settings will result in unsecured (unencrypted)
communications between the Scan Station and the FTPS
server.
- By default, Active port negotiation is used. Selecting
Passive will enable Passive port negotiation.
- Select an Encryption option: Implicit or Explicit. Consult
the FTP Server administrator for the appropriate encryption
option.
- Check Require verifiable SSL server certificate if your
network environment is more security conscious and you
require your certificates to be up to date and signed by
certificate authority.
• If you select SFTP the following options are available:
- If the SFTP site communicates on a port other than Port 22,
change the value using the up and down arrows. When you
select SFTP, the Port value will automatically change to the
default value of Port 22.