Kodak 500 User Manual
Page 18
Advertising
A-61628 December 2011
3-5
8. Enter the desired password and click Next. The following screen will
be displayed.
9. Select Obtain an IP Address automatically to use DHCP to obtain
an IP address to connect to the network or Assign an IP Address
to enable you to enter the desired IP address and click Next. The
following screen will be displayed.
10. Enter the required IP Address, Subnet Mask, Default Gateway,
Preferred DNS Server information and click Done.
A screen summarizing your settings will be displayed.
11. Click Yes to accept your selections.
12. When all desired setting have been made, continue with the Scan
Station installation. See the next section, “Installing the Kodak Scan
Station 500/520EX - Scanner Administration application”.
Advertising