Kodak 500 - Manual (Page 35)

3-22 A-61628 December 2011
When selected, the Remote Configuration Settings screen will be
displayed.
- Enter a network folder where the Scan Station will find updated
configuration settings.
- Select which day(s) of the week this operation will be performed.
- Select the time of day you want your Scan Station to check for
updates.
5. Click Done.
NOTE: When updating a configuration using this method, the
following fields will not be updated: Device Name, IP
Address and Device Password.
6. Select Volume to adjust the master volume of the Scan Station.
This will typically effect the volume of the startup and shutdown
music and the speaker sound from the FAX modem.
NOTE: If you do not hear the fax dial tone after changing the
volume, you may need to reboot the Scan Station.
7. If you want to configure the Scan Station to run the Setup Wizard
when the Scan Station is restarted, click Setup Wizard.