Konica Minolta NON-CONTACT 3D DIGITIZER VIVID 9i - Manual (Page 46)

44
Displaying the Status Information
The model name, version, lens, field calibration system information can be displayed.
[Operating Procedure]
1 Press .
The MENU view will appear.
2 Press to locate the arrow cursor to “IN-
FO”.
3 Press (or ).
The status information will be displayed as shown be-
low.
Item Explanation
CAMERA
Displays information
about the VIVID 9i digi-
tizer.
MODEL
NAME
Shows the model name
(“VIVID 9i”).
VERSION
Displays the internal soft-
ware’s version number.
LENS
Identifies the lens that is
currently mounted.
TELE: Telephoto lens
MIDDLE: Middle lens
WIDE: Wide lens
S/N Shows the serial number.
FIELD CALIBRATION
SYSTEM
Shows information about
the field calibration sys-
tem.
S/N
Shows the serial number of
the field calibration sys-
tem.
STANDARD 3 HQ ON NF ON
COLOR OFF
W.B. DEFAULT
SCSI 5 ENABLED
WHITE BALANCE
INITIAL MODE
INITIAL CONDITION
SCSI SETTINGS
INFO →
INFO
CAMERA
MODEL NAME 9I
VERSION 1.00
LENS MIDDLE
S/N 2001005
FIELD CALIBRATION SYSTEM
S/N 2001005
SELECT
ENTER
Vivid910-hard-E.book Page 44 Monday, October 18, 2004 3:11 PM