Konica Minolta NON-CONTACT 3D DIGITIZER VIVID 9i - Manual (Page 6)

4
Notes On Cleaning
• If the VIVID 9i needs cleaning, wipe with a soft dry cloth. Never use solvents such as thinner or benzene.
• If the lens or laser emitting window is soiled with sand or dust, blow off the dirt using a blower, and wipe
them gently with a piece of cleaning paper dampened with cleaning agent.
• In cases of malfunction, do not disassemble the VIVID 9i or attempt to repair it yourself. Contact the nearest
KONICA MINOLTA SENSING-authorized service facility.
Notes On Maintenance
To maintain the accuracy of the high-precision Galvano mirror, that plays the most important role in measure-
ment accuracy, a drying agent is used inside the VIVID 9i. Normally, the dehumidification effect of the drying
agent lasts more than one year. However, its life varies with the operating and storage environment.
To maintain the designed performance of the VIVID 9i, you are recommended to replace the drying agent once
a year. Contact the nearest KONICA MINOLTA SENSING-authorized service facility.
Vivid910-hard-E.book Page 4 Monday, October 18, 2004 3:11 PM