Karcher WATERCLEAN 600 CD - Manual (Page 41)

41
WTC 600 LP / MP OPERATION OF THE SYSTEM
Service Handbook 08.2004
3.4.5 Putting Out of Operation
Normally, do not switch off with the main switch (a possibly active flushing program
may be interrupted).
The RO system working in normal operation is switched off only via the float switch
when the drinking water tank is full.
The current operating mode is also maintained in the switched off condition, meaning
after switching on again, the control system is in the same operating mode as before
switching off last with the main switch.
The system is switched off e. g., when putting out of operation for extended periods. For out-of-
operation periods exceeding 14 days, the equipment must be conserved (see Chapter 4.4.4).
Enter user password for this (compare with Chapter 3.4.3.1):
> 1 ackn. failure <
2 operat. mode
Indication:
Press the pushbutton.
Indication:
Press the RETURN pushbutton.
Indication:
Press the pushbutton.
Indication:
Press the RETURN pushbutton.
Indication:
Press the pushbutton.
Indication:
Press the RETURN pushbutton.
Indication:
Press the ESC pushbutton.
Indication:
The equipment is switched off now.
1 ackn. failure
> 2 operat. mode <
operation mode
OPERATION
operation mode
Stop
are you sure ?
>no< yes
are you sure ?
no > yes <
1 ackn. failure
> 2 operat. mode <
RO 1000 V 01.34
Stop
CAUTION
NOTE
NOTE