Kenwood TM-V71E - Manual (Page 19)

11
Indicator Description
Appears while transmitting.
Appears while using the data band.
Appears when the data terminal is set as 600 (bps).
Appears when the frequency is set to ***,***,250 Hz.
Appears when the frequency is set to ***,***,500 Hz.
Appears when the frequency is set to ***,***,750 Hz.
Appears when the frequency is set to ***,***,333 Hz.
Appears when the frequency is set to ***,***,666 Hz.
Appears when the F key is pressed.
Appears when mute function is ON.
Appears while making a continuous recording.
Appears while in EchoLink Sysop mode.
Appears when the Key Lock function is ON.
Appears when making a PM channel call.
Appears while in Menu mode and when the Tone/CTCSS/DCS
code is selected.
Blinks when recalling a PM channel and while writing to memory.
Only the “1” will blink while recording or in playback mode.
Appears while accessing the Menu.
Blinks when recalling a PM channel and while writing to memory.
Only the “2” will blink while recording or in playback mode.
Appears when entering characters in Menu mode or entering a
code.
Blinks when recalling a PM channel and while writing to memory.
Only the “3” will blink while recording or in playback mode
Appears when entering characters in Menu mode or entering a
code.
Blinks when recalling a PM channel and while writing to
memory. Only the “4” will blink while recording or in playback
mode.
Appears when entering characters in Menu mode or entering a
code.
Blinks when recalling a PM channel and while writing to
memory.
Appears when Weather Alert is ON. Blinks when receiving a
signal. (K type only)