Automatic dialer – Kenwood TM-V71E User Manual
Page 64
Advertising
56
AUTOMATIC DIALER
There are 10 dedicated DTMF Memory channels available to store DTMF codes.
You can store up to 16 digits in each channel.
n
Storing a DTMF Code in Memory
1 Enter Menu mode and access Menu 301 (DT.MEM) {page 20}.
2 Rotate the Tuning control to select a channel number.
3 Press the Tuning control to set the selected channel number.
• The name entry display appears.
4 Enter a name for the channel {page 24}, the press the Tuning control to set
it.
• The code entry display appears.
5 Enter a DTMF code for the channel {page 24}, then press the Tuning
control to set it.
Advertising
This manual is related to the following products: