Connecting the pg-5g/ pg-5h interface cables, Installing the dfk-3d panel kit, Ninstalling the sub-panel – Kenwood TM-V71E User Manual
Page 98
90
cONNecTINg The Pg-5g/ Pg-5h INTerface cableS
The PG-5G package comes with cable w (below).
The PG-5H packages comes with cables q and w (below).
q
Data communications cable
w
Serial communications cable
To PC
audio terminal
To PC 9-pin
D-SUB terminal
Note: When connecting the regular cable in your vehicle, the terminal may disconnect due to
vibrations. Be sure to lock the cable in place.
INSTallINg The DfK-3D PaNel KIT
n
Installing the Sub-Panel
1 Detach the front operation panel from the
base unit, then remove the modular cable
from both sides.
2 Connect the 4-pin connector of the supplied
modular cable to the operation panel.
• Align the cable with the cable guide.
cable guide
PC terminal
PC terminal pins:
No. Name
I/O
Function
q
RTS
O
Request to Send
w
CTS
I
Clear to Send
e
TXD
O
Transmit Data
r
GND
—
GND
t
RXD
I
Receive Data
y
NC
—
—
u
NC
—
—
i
NC
—
—
• For DATA terminal, refer to page 83.
Data communications cable pin configuration
Serial communications cable pin configuration
(cross connection)
Pink: To microphone input terminal
Green: To line out terminal