KTI Networks KS-2601 - Manual (Page 33)

29
PORT Status Auth.Mode
=================================
1 Yes FA
2 Yes FA
3 Yes FA
4 Yes FA
5 Yes FA
6 Yes FA
7 Yes FA
8 Yes FA
9 Yes FA
10 Yes FA
11 Yes FA
12 Yes FA
13 Yes FA
14 Yes FA
15 Yes FA
………………………
=================================
The Auth. Mode could be Auto, FA(Forced Authenticated), FU(Forced
Unauthenticated) and No(No 802.1x function).
3.8 show guest will show current username and password for guest account.
For example,
>show guest
[Guest configuration]
Username: guest
Password:
3.9 show gvrp command will show current GVRP function status for 802.1Q
VLAN operation.
For example,
>show gvrp
GVRP Protocol : Disable
3.10 show http command will show http enable/disable state. If it is disabled,
the web management interface of the switch will be OFF.
For example,
>show http
[HTTP Protocol Setting]
HTTP Setting: Enabled
3.11 show idle command will show the idle time for console to logout
automatically. If no any keystroke in this time, the console and telnet
interface will logout automatically for security.
For example,
>show idle
Current idle time: 600(Second)