KTI Networks KS-2601 - Manual (Page 5)

1
1. Introduction
This managed switch is a Layer2 management switch with lots of advanced
network functions including VLAN, trunking, spanning tree, mirror port, IP
multicast, rate limit and port configuration. It supports console, telnet, http and
SNMP interface for switch management. IEEE 802.1x is supported for port
security application. These functions can meet most of the management request
for current network.
1.1 Package Contents
One Intelligent Switch
One AC power cord (* for AC power model)
One console cable
Two rack-mount kits and screws (* for 24+2G model only)
This user's manual
2. Where To Place the Managed Switch
This switch can be placed on a flat surface (your desk, shelf or table).
Place the Intelligent Switch at a location with these connection considerations in
mind:
The switch configuration does not break the rules as specified in Section 3.
The switch is accessible and cables can be connected easily to it.
The cables connected to the switch are away from sources of electrical
interference such as radio, computer monitor, and light fixtures.
There is sufficient space surrounding the switch to allow for proper ventilation.
You can also install the 24+2G models Intelligent switch on a 19" rack with the
rack-mount kits.