KTI Networks KS-2601 - Manual (Page 43)

39
6.3 Management with Http Connection
You can manage the switch with Http Web Browser connection. Before http
connection, IP address configuration of the switch should be done first.
Please follow the instruction in Section 6.2 to complete the console connection
and use “show net” command to check IP address of the switch first. If users
want to change the IP address of the switch, use “set net ip xxx.xxx.xxx.xxx
netmask xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx” command to modify the
IP address of the switch. The default IP configuration is 192.168.1.5 and mask
255.255.255.0.
After IP address configuration done and the switch is connected to network, you
can start Http connection by entering IP address of the switch to the web address
line in Web Browser. A login screen will be prompted for user name and
password. The default user name and password is "admin" / ”123456”. Then
the management homepage will appear.
Left part of the homepage is a function list. You can select one of them for
status monitoring or switch configuration.
Upper part of the homepage is the link status of the switch. Three different
colors are used to show different status of ports – Link Up, Link Down and Port
Disable.
Middle part of homepage is the main operation area for each function.